Mutoh Valuejet 1614 Driver

Mutoh ValueJet 1614 For the sign & display market The Mutoh ValueJet 1614 eco solvent printer, with a top speed of 18.2 m²/h, has been specifically developed for the sign & display market. Offering a media width of 1625 mm and a printing width of 1615 mm, the Mutoh ValueJet 1614 produces full-colour posters, banners, backlit panels, POS displays, notices, signs and stickers. Band free printing on the Mutoh ValueJet VJ1614 Incorporating Mutoh's i² Intelligent Interweaving technology to reduce banding, the Mutoh ValueJet 1614 will offer typical production speeds (720 x 720 dpi, 4 pass) up to 15 m²/h on banner and up to 8.6 m²/h on vinyl. The Mutoh ValueJet 1614 incorporates a new generation piezo drop-on-demand variable drop 'wide-model' print head.

All necessities such as the Firmware Update Wizard, the Mutoh maintenance assistant. 3. Desain banner format cdr. 1 UNINSTALLING THE OLD DRIVER WHEN USING WINDOWS 2000. ValueJet 1204, ValueJet 1304, ValueJet 1604, ValueJet 1614 and Osprey. Offering a media width of 1625 mm and a printing width of 1615 mm, the Mutoh ValueJet 1614 produces full-colour posters, banners, backlit panels, POS.

The 1440 nozzle head incorporates four colour sections (two nozzle rows of 180 nozzles/colour). Unwinder / winder systems Mutoh ValueJet VJ1614 Optional unwinder / winder systems are the T winder 30 take up unit, equipped with a tension bar system, for media rolls up to 30 kg and the unwinder / winder 100 system with tensioning mechanism for motorised unwinding and winding of media rolls up to 100 kg. Downloads • • • Related Products •.

Part 1: Initial Powering of Your Printer DO NOT PUT ANY CLEANING OR INK CARTRIDGES IN THE MACHINE PRIOR TO DOING THE FOLLOWING STEPS. Plug the AC Cable directly into the wall (Preferably a dedicated circuit). This circuit must not have any appliances such as Air Conditioners, Refrigerators, Freezers, etc. It must also not be plugged into an extension cord of any kind or any type of Surge Protector or Power Strip. The machine has fuses and is protected from any power surge. Remove the “HEAD LOCK.” 3.

Remove all packing tape. Turn the Printer “ON.” 5. It will ask you to insert the Cleaning Cartridges, INSERT THE CLEANING CARTRIDGES AT THIS POINT.

The HEAD WASH will now begin. Once the HEAD WASH is completed, the Printer will then ask you to insert The Ink Cartridges, Insert the INK CARTRIDGES now. The Printer will now do an INK FILL. Once the machine has completed the “INK FILL”, Turn the machine “OFF.” 9.

Milleduemila un mondo al plurale 1 pdf en. Insert Media, and lower the “Media Rollers.” 10.Turn on the printer. It will now sized the media and indicate (in Millimeters) the width of the media.

12.You must press “ENTER” at this point to accept the media size. The Printer should now indicate “READY TO PRINT.” Part 2: Configuring the IP Settings. The Printer 1. The printer indicates “READY TO PRINT.” 2. Press the “MENU” button. Using the “RIGHT” arrow button scroll right once.

Using the “DOWN” arrow button scroll down to “IP ADDRESS.” 5. Press “ENTER.” 6. Configure the address to 172.018.003.101 7. Press “Enter” to save this setting. Press “CANCEL” one time. Using the “DOWN” arrow button scroll down once to “SUBNET MASK.” 10.

Press “ENTER.” 11. Configure the Subnet Mask to 255.255.255.000 12. Press “Enter” to save this setting.

Press “CANCEL” all the way back to “READY TO PRINT.” The Computer 1. On your computer go to “START” then “CONTROL PANEL” then “NETWORK CONNECTIONS.” 2. Locate the “Local Area Connection” that you have your Printer connected to using a “CROSS-OVER” Ethernet Cable. “RIGHT CLICK” on the that “Local Area Connection” and scroll down to “Properties” and left Click. Scroll down to “Internet Protocol (TCP/IP)” and highlight it. Then click on the “Properties” button.

Put a “DOT” in beside the term “Use The Following IP Address.” 6. Now enter the IP Address “172.018.003.100” 7. Now enter the Subnet Mask “255.255.255.000” 8. Press “OK.” 9. Go back to the “Windows Desktop.” 10.Open your Flexi Sign “Production Manager.” 11.Go to “SETUP”, then “ADD SET-UP.” 12. Choose “COLOR PRINTERS.” 13.

Choose “MUTOH.” 14. Choose “VJ-1204 or VJ-1304 or VJ1604.” 15. Choose “TCP/IP.” 16. Enter “172.018.003.101, Port should already be “9100.” 17.Save these settings.

You must now configure your Color Printing Settings. Part 3: Setting Your Colors 1.

It is time to install the Color Profiles you intend to use. You can do this from the Flexi Sign 8.5 DVD by ‘Exploring the DVD for “COLOR PROFILE INSTALLER.” 3.

By running the “COLOR PROFILE INSTALLER” you can install all the preferable profiles for your printer. Once this is done, open your “PRODUCTION MANAGER.” 5.

Select your Printer; “RIGHT CLICK”; and select “DEFAULT JOB PROPERTIES.” 6. You will now be at the “DEFAULT JOB PROPERTIES” screen. Choose the “COLOR MANAGEMENT TAB.” 8. Configure the settings as indicated above. Choose the “ADVANCED” button. 10.Configure these settings as indicated above.